DIN-rail battery back-up


  • Built-in battery
  • 12V/2.4Ah - 24V/1.2Ah
  • Parallel operation
  • Small dim. 110x100x100 mm
  • Charge current limit
  • Temp. feedback for battery charging
  • Logic outputs
  • Undervoltage lock-out
  • Overtemp. shut down
  • Fused battery for safety
  • Electronic switching
  • Easy mounting and wiring
  • Up to 10 A

Back-up time:

15 min. > 50W
30 min. > 30W
1 hour   > 16W
3 hour   >   7W



The EMT7BATT12 & EMT75BATT24 will support your system/application with battery back-up power.

Together with our well known EMT 7500 Series, this battery back-up system using the latest technology will support back-up power for many years, supported by logic outputs for control and alert functions, all in one unit mounted on a DIN-rail.

Unit is based on 2 pcs 12V / 1,2A hour Lead-Acid Batteries, which will deliver up to 10A. The built-in electronics will secure correct charging of the batteries and ensure that power is available on the terminals. The electronics will also support your system with logic signals, so remote surveillance of the status is possible. This is done via the free relay contact sets, that can be used for any logic function.

A built-in temp. feedback will, when connected to the EMT 7500 series, compensate charging according to the battery temperature (adjusted with 3mV/°C per cell).

The EMT75BATT Series are mounted in solid aluminium housing with dual DIN-rail brackets and supplied with screw terminal connectors for easy installation & service.

Units can be mounted in parallel, to increase battery capacity and is delivered with female connectors and a fixed set of wires for the EMT7500 connection.

Download datasheet

Flux A/S Industrivangen 5 4550 Asnaes - Denmark Phone: +45 59650089 Fax: +45 59652120 E-mail: flux@flux.dk